Protector XStream Laboratory Hoods


PROTECTOR XSTREAM LABORATORY HOODS

Catalog Home / Laboratory_Equipment / Chemical_Fume_Hoods_and_Enclosures / Protector_XStream_Laboratory_Hoods

4 foot Protector XStream Laboratory Hoods

List all 4 products in this group

4 foot Protector XStream Laboratory Hoods
The Protector XStream Laboratory Hood takes containment safety and energy savings to the extreme. This general chemical high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open the Protector XStream was subjected to 50 fpm cross drafts NIH protocol and tracer gas measurements in the chest of the mannequin. In all scenarios the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory the ability of this hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost but energy savings is equally impressive. Although face velocity is a factor itís the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity with the sash in its fully open position requires only 690 CFM. Regardless of your desired operating face velocity the Protector XStream yields the lowest required CFM of any hood.

List all LabConco Products

5 foot Protector XStream Laboratory Hoods

List all 4 products in this group

5 foot Protector XStream Laboratory Hoods
The Protector XStream Laboratory Hood takes containment safety and energy savings to the extreme. This general chemical high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open the Protector XStream was subjected to 50 fpm cross drafts NIH protocol and tracer gas measurements in the chest of the mannequin. In all scenarios the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory the ability of this hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost but energy savings is equally impressive. Although face velocity is a factor itís the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity with the sash in its fully open position requires only 690 CFM. Regardless of your desired operating face velocity the Protector XStream yields the lowest required CFM of any hood.

List all LabConco Products

6 foot Protector XStream Laboratory Hoods

List all 4 products in this group

6 foot Protector XStream Laboratory Hoods
The Protector XStream Laboratory Hood takes containment safety and energy savings to the extreme. This general chemical high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open the Protector XStream was subjected to 50 fpm cross drafts NIH protocol and tracer gas measurements in the chest of the mannequin. In all scenarios the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory the ability of this hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost but energy savings is equally impressive. Although face velocity is a factor itís the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity with the sash in its fully open position requires only 690 CFM. Regardless of your desired operating face velocity the Protector XStream yields the lowest required CFM of any hood.

List all LabConco Products

8 foot Protector XStream Laboratory Hoods

List all 4 products in this group

8 foot Protector XStream Laboratory Hoods
The Protector XStream Laboratory Hood takes containment safety and energy savings to the extreme. This general chemical high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open the Protector XStream was subjected to 50 fpm cross drafts NIH protocol and tracer gas measurements in the chest of the mannequin. In all scenarios the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory the ability of this hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost but energy savings is equally impressive. Although face velocity is a factor itís the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity with the sash in its fully open position requires only 690 CFM. Regardless of your desired operating face velocity the Protector XStream yields the lowest required CFM of any hood.

List all LabConco Products
We Offer Over 28,000 Products
Protector XStream Laboratory Hoods
Purchase Orders Accepted
(subject to approval)
Credit Application

Rated "A+" with the BBB
26 years, Zero Complaints

Best Protector XStream La...

Need Help?
818-786-0600

Best New Product
Quick Twist Reverse Osmosis System

Quick Twist
Reverse Osmosis System
Great for Lab Water Pretreatment
or Great Drinking Water

Got Millipore?
Click Here For Huge Savings

Shower Filters
Reduces chlorine
and other contaminents

New Feature
Lab Water Filter Database

Millipore Filter Quick List
Barnstead Filter Quick List

Barnstead Micropure - Protector XStream Laboratory Hoods
Protector XStream La... the protector xstrea... the protector xstream laborato... Are You Lost?
See Your Breadcrumbs
List All Products

APS Water Services Corp. 7320 Valjean Ave, Van Nuys, CA. 91406
800-460-9011 Toll Free | 818-786-0600 Local/International | 818-786-2347 Fax | Public@apswater.com




Best Protector XStream Laboratory Hoods Best the protector xstream laboratory hood takes containment safety energy savings extreme. general chemical performance fume hood was independently tested Best Carbon Filter

Images may or may not be of actual product.

* Flat Rate UPS shipping when able to ship via UPS and is in the USA excluding Hawaii and Alaska.
Larger Items may not be able to ship via UPS, in that case freight charges will be quoted seperately.

4/26/2017 at 4:50:37 AM
Terms and conditions
Credit Application

Privacy Policy

Tags : the | protector | xstream | laboratory | hood | takes | containment | safety | energy | savings | extreme. | general | chemical | performance | fume | hood | was | independently | tested

Protector XStream Laboratory Hoods


Protector XStream Laboratory Hoods
Clack is a registered trademark of Clack corporation

Barnstead Water Filtration Products
Laboratory Water Products
APS Scientific