Lab Water Purification Systems

Index View

Catalog Home / Lab_Water_Purification_Products / Lab_Water_Purification_Systems

Browse Lab Water Systems by Purity Level
Section Index
List 4 sub categories in this group        List all 49 products in this group

In this section you will find laboratory water systems categorized by Purity Level. We offer General Chemistry (basic , Low Organic UV , Pyrogen and Endotoxin Free (UF , and low Organic / Pyrogen free (UV / UF combination units. You will find all the brands we carry compared against each other and sorted by the purity of water they produce.

We also offer
Cerified used and new old stock laboratory water systems.

Browse Lab Water Systems by Brand
Section Index
List 2 sub categories in this group        List all 77 products in this group

In this section you will find laboratory water systems categorized by brand name. We carry Aquamax , Barnstead , Labconco and Millipore brand laboratory water purification systems.

We also offer
Cerified used and new old stock laboratory water systems.

Distillation Equipment - Water Purification Still
Section Index
List 2 sub categories in this group        List all 59 products in this group

In this section you will find laboratory water distillation systems. a Still purifies water by boiling pretreated water and then condenses the steam into purified water. Water purified with a still is generally bacteria and pyrogen free with a chemical purity of .1 to 10 p.p.m. depending on how long it is stored.

About Distilled Water

Bottled and Distilled
Laboratory Distillers
Residential and Commercial Distillers

We also offer
Cerified used and new old stock laboratory water systems.

Economy Laboratory Reverse Osmosis Systems

List all 7 products in this group

In this section you will find economy reverse Osmosis and RODI Systems. Adding a reverse osmosis system as pretreatment to a lab polishing system will allow the filters in the polisher to last up to 15 times longer which will lower your replacement filter cost by 95%.

A RODI system add a high purity deionizer filter and water quality monitor to produce higher quality water for use as incubator feed, high quality rinse water for film, anodizing or other high purity rinse or plating applications. These systems are compact and simplified to provide purified water that is suitable for type II or III lab grade , humidifiers and as feed water for laboratory water polishing systems. These systems offer very low capital cost and are very inexpensive to operate compared to most lab reverse osmosis systems

We also offer
Cerified used and new old stock laboratory water systems.